Soundcraft B400 Bedienungsanleitung PDF herunterladen (Seite 52)

4.24 B400 Functional Description

MMoonniittoorr MMoodduullee

The Monitor Module provides facilities for mono and stereo monitoring of many

internal and external sources.

MMoonniittoorr SSoouurrcceess

SSOOUURRCCEE AA//BB

The SOURCE A/B switch selects either the DESK A or the EXTERNAL B bank

of switches as the monitor source. The switching may also be done externally via

separate control lines for the left and right signals. The EXT L and EXT R LEDS

illuminate when the external control is active.

EEXXTTEERRNNAALL BB

The EXTERNAL B bank of illuminated switches allows you to select any 1 of 8

external inputs as the external monitor source, when the SOURCE A/B switch is

pressed. The external source inputs are via the 90-way EDAC connectors on the

rear panel.

The adjacent writing strip is provided to identify the inputs.

DDEESSKK AA

The DESK A bank of switches allows you to select any 1 of 6 internal signals as

the internal monitor source when the SOURCE A/B switch is released. The 6 are

selected via the scramble card in the console (see section 2 of this manual). The

six signals may be chosen from the following list:

Group 1 to Group 8 (mono)

The Main Stereo Master mix

The Mono Mix of the Stereo Master

Aux 1 to Aux 3 (mono)

Aux 4 (stereo)

There is also a spare feed which may be used to monitor any suitable point in the

console.

The adjacent writing strip is provided to identify the inputs.

The factory default setting is detailed in section 2 of this manual.

MMOONNOO SSOOUURRCCEE

When the MONO SOURCE L & R switches are both released, stereo sources are

normally sent in stereo to the monitor. However if the MONO SOURCE L switch

is pressed then the left signal is fed to both sides of the monitor circuit. Similarly

the right signal is routed to both sides if the MONO SOURCE R is pressed. If both

switches are pressed then a mono mix of left and right is fed to both sides of the

monitor.

MMoonniittoorr OOuuttppuuttss

The Monitor System outputs its signals to two pairs of Monitor Speaker Outputs

and to a Headphones Output. These outputs are all located on the rear connector

panel.

PPHHOONNEESS LLEEVVEELL

The headphones output level is controlled by the PHONES LEVEL control.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Soundcraft B400 Bedienungsanleitung Seite 52

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Soundcraft B400